M2 Rear Loader
McNeilus M2 Rear Loader
https://www.lmi.ca/index.php?option=com_k2&view=item&layout=item&id=93&Itemid=158#sigProGalleriaa14d0e9588
For international markets, the McNeilus M2 rear loader, with its improved design, is perfect for haulers looking for a lightweight, reliable, and easy to maintain body that can be mounted on a single-axle chassis.
Available in 17, 20, and 25 cubic yard body configurations, the M2's rugged design and low cost of maintenance make it the ideal refuse body for your fleet.
-
Specifications:
BODY
Floor 3/16" AR200 Roof 10 GA AR200 STEEL Side Walls (front) 10 GA AR200 STEEL
Side Walls (back) 10 GA AR200 STEEL
TAILGATE AND HOPPER
Floor (hopper thickness)
1/4" AR200 STEEL
Quick-change UHMW polyethylene slide shoes
PACKER
Slide Face Plate
3/16" ASTM A572 GR 50 STEEL
Sweep Face Plate
1/4" AR200 STEEL
Packer Edge Strip
3/4" ASTM A36
HYDRAULICS
Pump Make/Model
Parker Model P350
Pump Size
1.5'
Pump Flow
24 gpm @ 1300rpm
Control Valves
VA 20 for ejector and TG lift and VA 35 for slide and sweep
Oil Reservoir
40 Gallons
Filter
Return filter 10 micro
Suction Strainer
141 mesh stainless steel with magnets
CYLINDERS
Ejector
6.25" x 4.50" x 3.56" (17yd, 2 stages 71.50" in length)
6.50" x 5.50" x 4.50" x 3.56" (20yd, 3 stages 88.75" in length)
6.50" x 5.50" x 4.50" x 3.50" x 3.68" (25yd, 4 stages 123.31" in length)Sweep Cylinder 4" x 2-1/2" x 23"
Slide Cylinder 4" x 3" x 32-1/2"
Tailgate Cylinder 3.00" x 2-3/8" x 38"
HARDWARE
Weather Pak Connector—Deutsch Connectors Aeroquip Hoses and Fittings Hydra-Zorb and Stauff Clamps PAINTING
Packer and components steel shot blasted prior to priming with high solids epoxy primer
Finish Coat Akzo Coating's Sikkens high solids acrylic urethane
Solid white standard OTHER OPTIONS AVAILABLE
Hopper work lights
Strobe light
Paint colors
Reeving cylinder
Cart tipper
Leachate tank
Container tipper (kick bar)
Winch