ZR Side Loader

McNeilus ZR-Series Automated Side Loader has a true zero-radius motion, eliminating arm kick-out.

The simple arm reduces total cost of ownership by lowering maintenance costs and increasing efficiency and driver productivity

► McNeilus ZR Full-Eject Automated Side Loader

Specifications:


GENERAL SPECIFICATIONS (ALL MODELS)

Hopper Floor 3/16″ AR400
 Body Floor 10 ga AR200
 Hopper Lower Inner Wall 3/16″ AR400
 Hopper Upper Inner Wall 10 ga GR50
 Hopper Lower Outer Wall 10 ga GR50
 Hopper Upper Outer Wall 12 ga GR50
 Body Walls AR450 and AR200 laser welded
 Upper Body Skirts   12 ga GR50
 Fenders 12 ga GR50
 Body Longitudinals 10 ga GR50
 Hopper Longitudinals 10 ga GR50
 Roof 12 ga GR50
 Follower Guides 10 ga GR50

TAILGATE

Ejector .25 AR200
 Side and Rear Walls .125″ (.31 cm) AR450
 Post and Bolsters 10 ga ASTM A715 and A607 GR50

ARM

 Lifting Capacity 550 lb (249.4 kg)
 Lift Cycle Time 6.5 sec*
 Arm Reach 84″ (213.3 cm)
 *Full cycle — from ground to hopper and back to ground 


BODY SPECIFICATIONS


ZR24ZR26ZR28ZR31
Height100.1″ (254.2 cm)100.1″ (254.2 cm)100.1″ (254.2 cm)100.1″ (254.2 cm)
Length268.2″ (681.2 cm)288.5″ (732.7 cm)286.2″ (727 cm)306.5″ (778.5 cm)